When riding in rocky or rugged terrain, it’s possible to side swipe a rock with either your front or rear rotor as you maneuver around it. If that happens your rotor can become damaged or warped, impacting the reliability and ease of use of your brakes, possibly effecting your safety. A bent rotor will cause aggressive wear to your brakes. The AltRider Rotor Guards keep your rotors protected from unintentional hits; a new KTM rotor can cost over $120 to replace.
Keeping unsprung weight to a minimum on both the front and rear is critical for the suspension to react quickly to terrain. Our front rotor guard only adds 13 oz (0.36 kg), and the rear adds a minimal 6 oz (0.17 kg) in weight because it replaces the rear brake hanger for a well-integrated system for true structural support. By removing any unnecessary material, we have one of the lightest guards on the market that minimizes surface area for mud to stick to. Not only are the AltRider KTM Rotor Guards lightweight, but they are engineered to optimize strength by fastening to the bike at the most secure points.
Front Rotor Guard
The front fastens to the robust 22 mm axel, maximizing strength & stiffness. It replaces the left side spacer with a strong 8.5mm thick hub mount while maintaining the critical seal at the wheel bearing. The guard mounts to the hub with 2 M6 fasteners and uses 3 points of positive engagement. This creates maximum protection against lateral hits, and the support beams provide protection against direct hits. The guard covers the leading edge of the rotors, along the front and bottom, where your most likely to endure a hit. We avoided using the axel screw, as it’s a light duty aluminum fastener with fine threads, we also avoid the caliper bolt for mounting. They were never intended to have impact forces applied to them and wouldn’t be able to withstand a direct hit. Additionally, we do not utilize the front axle clamp bolts as they cannot provide structural support.
The Rear Rotor Guard
The rear also attaches to the robust 20 mm, 22mm, or 25 mm axel and replaces the rear brake hanger with a custom, intelligently designed hanger to maximize strength, while keeping weight down. The AltRider design doesn’t use the OEM hanger as its simply not designed to take an impact.
- Made from lightweight aluminum, the front only adds 13 oz (0.36 kg), and the rear adds 6 oz (0.17 kg) of weight
- Optimized balance between weight and protection
- Precision CNC machining to ensure an exact fit and tight integration with the OEM rear brake caliper
With the AltRider Rotor Guards installation is straight forward and servicing your brakes or forks is just as easy as it is without the guards on.
Font Guard Fitment
22mm axle fits:
KTM: 2015 SX/SXF/XC/XCF
KTM: 2016–Current All Models 125-500
Husqvarna: 2016–Current, 125-501 All Models
GAS GAS: 2021–Current All Models
Rear Guard Fitment
20mm, 22mm, and 25mm rear disc guard fits:
KTM: 2004–Current All Models
Husqvarna: 2014–Current 125–501 All Models
GAS GAS: 2021–Current All Models
Compatible with the all-new Braketec brake calipers found on 2022–Current model EXC/XC-W models
Print Friendly Version